Esempio configurazione Cisco FTTCab
Esempio di configurazione FTTCab per apparati Cisco.
OlimonTel nella Welcome-Letter fornisce i parametri sotto richiesti per la configurazione quali :
Login e Password oltre la VLAN assegnata.
Nell’esempio Vlan usata è 835, ma va sempre indicata quella fornita nella Welcome-Letter
controller VDSL 0
!
interface Ethernet0
description *** Link FTTC VDSL ***
no ip address
load-interval 30
!
interface Ethernet0.835
description *** PPPoE Link FTTC VDSL Dati ***
encapsulation dot1Q 835 VLAN 835 DATI
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
no ip address
!
interface FastEthernet3
no ip address
!
interface Vlan1
ip address 192.168.1.254 255.255.255.0
ip nat inside
!
interface Dialer1
description WAN PPPoE Dati
mtu 1492
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
no ppp chap wait
ppp pap sent-username LOGIN OLIMONTEL password cambiami
no ppp pap wait
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
ip nat inside source list 113 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
!
access-list 113 permit ip 192.168.1.0 0.0.0.255 any
!